当我在轴测中触发关卡切换时，布告栏和相机的位置仍然是之前的设置。由于级别不同，布告栏和摄像机的位置应该不同，才合理。请问如何根据不同的级别设置相应的摄像头和布告栏？
When I trigger the switch of levels in aximetry, the position of the notice board and camera is still the previous setting. Since the levels are different, the notice board and camera should have different positions to be reasonable. May I ask how to set the corresponding camera and notice board according to different levels?
Hi,
There are multiple methods to achieve this. One of the simplest approaches is to use Presets, where you would have one preset button for each map. For more information on Presets, please read this documentation.
Otherwise, instead of Presets, you could use Playlists.
Or you could consider adding a camera compound for each map and using If modules to switch between them. This way, each map could have its own control board.
Warmest regards,