Hello, I have a question, so I'm leaving a message.
Currently, it is being tested with Panasonic UE-150 PTZ Camera and is being tested with LEDs. <I am using Broadcast Version.>
I followed the tutorial document on the homepage, but the problem with AR Tracking Delay was not solved.
(https://aximmetry.com/learn/bpl-admin-docs/removed-from-old-hierarchy/using-led-walls-for-virtual-production/#switching-between-cameras)
I am attaching a link that took a picture of the part where the problem occurred.
(https://drive.google.com/file/d/1dwLIZaQIg9WpcxoHgaFPPWESKOb6WzvR/view?usp=share_link)
I want to know what the problem is and find a solution.
Hi,
We have an updated documentation on the Led Wall compound here: https://aximmetry.com/learn/virtual-production-workflow/preparation-of-the-production-environment-phase-i/led-wall-production/using-led-walls-for-virtual-production/
You should try setting up AR Tracking Delay: https://aximmetry.com/learn/virtual-production-workflow/preparation-of-the-production-environment-phase-i/led-wall-production/using-led-walls-for-virtual-production/#tracking-delay while using 0 Picture Delay: https://aximmetry.com/learn/virtual-production-workflow/preparation-of-the-production-environment-phase-i/led-wall-production/using-led-walls-for-virtual-production/#picture-delay
And when you find the correct AR Tracking Delay, then set up the Picture Delay.
Warmest regards,