Calibration profile issue with 4.2

Hi,

I was using a calibration profile with previous versions of Aximmetry without issues. I was using it with a video file with tracking data for training and demo purposes.

It is not working properly anymore with its associated video file and data with 4.2. It looks like the lens data is not construed the same way.

Besthttps://my.aximmetry.com/Forum/NewPost#

   Eric Soulard

Comments

Eric Soulard
  -  

After testing, it appears that it is working fine with AR compouds and not working properly with VR ones.

Eifert@Aximmetry
  -  

Hi Eric,

It's hard to tell what could have gone wrong without seeing how you connected the recorded tracking data to a VR compound.
A screenshot of the flow or your way of implementing that could greatly help.

If you used this to record the tracking, then it is likely that you don't need to apply calibration profile for the playback:

Warmest regards,

Eric Soulard
  -  

Hi,

This AR setup is working fine (no P/T drifting):

I'm using Input 2:

This VR one is not working fine (P/T drifting and it worked in previous versions):

I'm using in this case input 1 :

Best

Eifert@Aximmetry
  -  

Hi,

Both cameras are using the same system to process the tracking file. It can be that some settings changed in the Camera that affected your recording.
Like, be sure you have the right Camera Mode:

And no Manual Lens:

Also, Can you describe in more detail what kind of drifting you are experiencing?
And does it happen with the "TrackPromo_Green_0002.mov"? I don't experience any drifting with it and I see you have that recorded tracking:

Warmest regards,

Eric Soulard
  -  

Hi,

Solved by dactivating external lens data for the VR scene ANd resetting the tracking mode and tracking device for the same scene.

These last two points are not set the same ay in my AR scene, without causing any problem.

Many thanks