JP
EN - English
CN - 中文
JP - 日本語
Hi guys,
Is there any way to get the triggers to react like a key press;
I.e press and release create different effects.
Binding to a trigger i have to use a flip flop.
Help appreciated
Hi Techatox,If you mean the Trigger button on the Pin Values editor then unfortunately you cannot do that.
What you can do is using a Logical and create separate triggers for the On and Off transitions like this:
Of course in this case you won't have a button, but an On/Off switch on the Copy Logical.However you can assign the switch to a keyboard button:
Make sure that the controlling mode is set to Normal:
In this case you keyboard button will act like you described,
アップロード中にエラーが発生しました。再試行してください。
Hi Techatox,
If you mean the Trigger button on the Pin Values editor then unfortunately you cannot do that.
What you can do is using a Logical and create separate triggers for the On and Off transitions like this:
Of course in this case you won't have a button, but an On/Off switch on the Copy Logical.
However you can assign the switch to a keyboard button:
Make sure that the controlling mode is set to Normal:
In this case you keyboard button will act like you described,