How to I set up cameras in order to stream from them?
Camera set up
Aximmetry
-
For setting up your webcam the first step is to check if Aximmetry can see it as an input.
In the startup configuration window you should see something similar.
Select Device Mapper on the left, select the Video category and see if you can select your webcamera from one of the available drop down menus. (#1 in our example)
When you found it set the desired Mode. In our example this is set to 1920x1080 30 fps.
Press Start when you're done.
To quickly test your webcamera as input, please do the following steps:
Create a new compound.
Right click in the Flow window, click Insert Module (or press Insert on your keyboard while the compound is active).
Scroll down and in the Video section select the Source subsection and select Video Input.
Select the Video Input node and set the Device as Mapped: #1 in the Pin Values.
(You could've selected the device directly, but for future use we strongly suggest you set it to Mapped #1. This is because even if the device changes, once you reset your new device to this slot, all your previous scenes and projects will work automatically.)
To see the webcam feed in preview simply click on the Out pin on the node and drag it to the right hand side.
You should be able to see your webcam feed on Preview 1, on channel 1.
Alternatively you can load one of the existing demo scenes and Aximmetry will by default use the device set in the Mapped: #1 input.
If you need more insight into Device Mapping, please check out this video tutorial:
For further information, such as setting the green screen up in Aximmetry, please watch this tutorial:
If you need the basics of camera animation watch the following video
https://aximmetry.com/en/documentation2/video-tutorials/for-studio-operators/setting-up-virtual-sets-with-vr-cameras
and maybe you can find this topic useful for you
https://my.aximmetry.com/forum/postdetails/113-sequence-based-camera-paths-control-panel